скачать книгу бесплатно
There are no streams of charged particles in conductors in the event of such a phenomenon, which we call electric current – this stream does not exist.
But then the question is: “What is it then? What carries energy? If you stick your fingers into the socket, you will immediately understand – this is energy? What then carries this energy, if these are not charged particles?
The answer is that energy in electrical circuits, with the manifestation of factors that we call electrodynamics, is transferred by longitudinal density waves that arise between atomic bonds in the crystal lattice.
If the substance of the material is capable of forming these waves inside its crystal lattice, we call such a material a conductor.
In liquids and gases – there are real ions, there is a real flow of particles of matter. But we will not touch on this. We are interested in electrodynamics. These longitudinal waves of energy look like this:
What is a wave? Let’s take the course of the school (approximately) … A wave is an ordered process of oscillation of particles forming a wave near the equilibrium position. What can a wave do? A wave, and this is the main thing, can carry energy. And since there is energy transfer, it means that the wave can exert pressure, affecting the energy density of this wave.
Yes, the wave carries energy, but the wave does not carry any particles. Oscillation of these particles “back and forth” near the equilibrium point, this wave forms, but does not transfer anything anywhere. This means that there is no current of particles and cannot be.
In this case, the circuit must be closed. And the phenomena that accompany the wave transfer of energy inside the conductor, which we know as magnetic and electric fields, are also only wave processes, but of a more complex nature and form, about which we still know little. These wave processes can also transfer energy, but these waves do not transfer any substance, some substance.
A longitudinal wave in a conductor, which we perceive as an electric current, propagates along interatomic bonds, interatomic threads formed from gravitons and phonons, opened into longitudinal cylindrical spirals, and lined up “at the back of the head” to each other.
Then, in these longitudinal cylindrical interatomic spirals, somewhat reminiscent of springs, during the formation of a longitudinal wave, zones of densification and rarefaction will form. And this is nothing but a manifestation of charges. Each element of a longitudinal wave, each of its period, formed by compression and rarefaction, has a minimum charge. That is why the energy flow of a longitudinal wave can be identified by us as a flow of charges. And it is right. But this is not a stream of particles, it is only a stream of an energy density wave.
I am telling all this in order to explain that with the help of electrodynamic phenomena, it is impossible to obtain any over-unit phenomena of the manifestation of additional energy.
In order to receive this additional energy, its, this energy, you must first release their ethereal particles, creating the necessary conditions for this. And the most important of these necessary conditions is the densification of the ethereal substance.
But this ethereal substance can be condensed only if this substance is introduced, plunged into a real dynamic process. In our case, we need a process of helical injection, helical dynamic pumping. But in any case, this is a dynamic process, in contrast to the wave processes occurring in electrical circuits.
That’s why we need a generator that could provide this dynamic process – form and support.
For this we will use electrostatic generators.
In general, the term “electrostatic generator” is very deafening. What is electrostatics? This is a branch of the science of physics that studies motionless, static charges. And what do we know here? We know Coulomb’s law, we know a couple of formulas, we know that an electron has the smallest charge, and we know the numerical value of this minimum charge. And that is all!!!
Giant knowledge! We also know the value of the minimum “zero” level of the density of the ethereal substance. This value is a parameter that we call “Electrical Constant”. Did you know it? That’s it… Meanwhile, in English this constant is called “Vacuum Density Constant”. Did you know it? O!
And all this applies only to stationary charges – this is real electrostatics.
About real electrodynamics – about real dynamics, about the real movement of charges, we know nothing. From the word “absolutely”. But it is real electrodynamics that is the door behind which there is a path to unlimited energy.
Meanwhile, before our ancestors knew about it incomparably more. Just knowledge destroyed. Concepts and definitions have been replaced and replaced. Brainwashed with various theories like “Theory of Relativity”. We put on an industrial basis a technique for withdrawing various achievements in this area through the use of patent offices. Organized en masse the work of various committees for the “Combating Pseudoscience” for public and wide condemnation, ridicule, defamation and criticism of both researchers and all sorts of attempts by these researchers to get to this closed knowledge.
You won’t find any information on the net. Everything is in the archives. Something in the libraries.
I found something on the net and was amazed at what scientists were doing at the beginning of the 20th century. Electrostatics is represented by various types of generators, for example. Electrostatic transformers, for example, have nothing in common in design, they have nothing in common with electrical transformers. That’s right, some little things. The question is, why was it necessary?
Nothing… Let’s figure it out… We return to our sheep.
To obtain dynamic processes, which we will call aether dynamics, we need special generators.
We know them. These are electrical generators. These are Tribogenerators. These are piezo generators. There are also nuclear ones, but this is not about us, ordinary people.
Tribostatic generator. This is a Van der Graf generator. mechanical type. Simple. The stationary Brush rubs against the moving conveyor belt, charges are generated and these charges are transferred to the terminal in the form of a metal ball. Variety – pellet generator. In addition, the principle of electrostatic induction is applied.
Piezogenerator. It is mainly used to ignite various types of lighters, to ignite all kinds of burners.
Electrophore generator. This is the most important generator. Overriding. I myself only recently got to the bottom of its true purpose. Although I have been using it for more than one year, the truth has only now been revealed, although it has always been on the surface. We will talk about him.
An electrophore generator, or an electrofork, is an electrical machine designed to multiply a charge, separate it and distribute it to capacitors.
An electric fork, in itself, does not have its own charge, but it can multiply in large quantities and in a short period of time a charge brought from outside.
I remember when I bought it, unpacked it, twisted the handle – damn it, it doesn’t work. Get online and ask. It turned out that you first need to put the initial charge on the disk. Or a comb, or a newspaper between the disks to insert and spin – I did, and the machine started working.
Here is the electric machine. Works, in this case, with a tribocharge. A tribocharge is a graviton charge, where the negative charge is active.
We turn the handle. The generation has gone. How the generation itself takes place on the basis of the law of electrostatic induction, I will not describe the mechanics itself. Explore for yourself.
So, the generation started. What’s happening? Where do gravitons come from? They come from a jar – from a Leiden jar – a condenser. They, these gravitons are pulled out of one jar and transferred to the second jar. On the inner lining of this jar. Accordingly, an excess of gravitons appears on the inner lining, and the bank is negatively charged. In the first jar, from where gravitons are drawn out, the density of gravitons decreases and the jar becomes positively charged. On the outer plates, connected by a metal bridge, there is a flow from the lining of one can to another, and the outer plates are charged with opposite signs. This is necessary to maintain the energy balance – the total energy density in the banks remains at the same level. And we turn the handle.
If we stopped, then we would have two capacitors filled with a charge up to some nominal value. If we want to release the capacitors, drain the charges, we simply bring the spark gap balls together, there is a sharp flow from the area with high pressure to the area of low pressure with the release of a certain amount of Fire and Light, which immediately go into a bound state in the phonon-gravitonic ethereal field.
But we keep turning the knob. The capacitors are overfilled, but generation, due to the specifics of the electroforking device, continues. Where are the gravitons from?
Yes, from space. The arrester balls are far apart, or removed altogether. Then, with the help of one collector, where is plus, gravitons are pulled out of Space. More precisely, from the inter-thread space of the Space-Time Grid. They are pulled out and transferred with the help of a disk to the second collector. And then it is simply thrown out of it, in the same way, into the surrounding Space.
During this period, the graviton flow moves along the conductive elements of both collectors, the pulsation of which, moreover, is smoothed out with the help of receiver-capacitors. From one point of space we take, to another we transfer. The pressure difference that can allegedly be formed is immediately equalized. It’s like taking buckets of water from one corner of the pool and transferring it to another corner, trying to redistribute the density of the liquid in different corners in one pool.
If we attach wires to the ends of the collectors, continuing to turn the knob, a flow of gravitons will flow through these wires from the end of one wire to the end of the other, and the capacitors will smooth out the ripple.
This is how real electrodynamics is obtained – the movement of the flow of charges through the body of the conductor. One end will then have a negative potential sign – it can be injected or compacted from it. The second end will have a positive potential sign. From it we get rarefaction, pulling out charges, reducing the density of the graviton component of the ether.
And since it is this ethereal component that is “responsible” for such a part of the Space-Time Grid as Time, and it is gravitons that are responsible for the same section of information transfer, then in the definitions of “Kalagia” we are talking about such parameters as Density and Rarefaction of Time.
Time is condensed, pumped – minus. Time is being discharged, density is being drawn out – a plus.
We figured out two parameters, but there are two more – Density and Rarefaction of Space. But this is another type of electrostatics – piezoelectrostatics. The piezo charge generator looks like this
One lighter at the end, when pressed, gives out a minus, the second – a plus. At first I just tried to charge the capacitor with these lighters. It turned out that this had to be done “until death”, and then you will not achieve the result. And how will the flow of the piezo charge in the conductor be ensured? And then came the revelation…
I suddenly clearly realized that it is possible to multiply to the required amount, fill the capacitors, and get a positive charge flow in the conductor using the same electric fork. She has no charge of her own. What was given with that and works. But first it must be completely discharged, reset. Which is what I did.
The discharger zeroed the charge of the capacitors. Then he simply shorted all the segments with a disk to each other. That is, each metal segment on one disc short-circuited with a mating segment on the second disc. All segments without exception. And then he added positive and negative piezo charges to the disks in the right place in the right segments. Everything! Then we turn the knob and the reproduction, filling and dynamics of the movement of piezo charges along the conductors began.
In this case, we are working with phonons. With a positive active charge. This component of the ethereal substance is responsible for the formation of the grid of Space, for the atomic nucleus. Filled with fire energy.
At the end of the wire, where the potential for charging the charge is positive, there the Space becomes denser. At the other end, the density of phonons is pulled out, there is rarefaction, there the Space is discharged – there is a minus.
Thus, we have obtained two more parameters of power for ethereal dynamic devices – Density and Rarefaction of Space.
Let’s move on to the Rod of Hermes itself.
In ancient times, such tombstones were laid on the graves of the Russians, who owned magia and techno-magic. The drawing on the slab is nothing but the incoming flow of nourishment to the central channel of the Wand.
Thus, we have a two-component binary power supply system for a techno-magical device similar to the Wand of Hermes. To do this, we use two electrophore generators, each of which works with its own type of charge.
Previously, when these technologies were used without problems, electrophore machines were multi-station. At least two-post, so that there are power outlets of a different nature at once.
Household electrophore generators were in many homes, like Singer sewing machines.
Inside the body of the Wand there are two channels, for two power parameters. These channels are almost straight, slightly twisted to the right.
The snakes are made of a thick conductor so that there is enough space on this conductor for the movement of each of the two streams. Moreover, these streams will go towards each other – one pulls, the second pumps. The same applies to the center channel.
At the ends of the spirals, balls are attached – the heads of snakes. This is necessary in order to twist the incoming charge flows. Now we draw the diagram.
You have to try both options. Feed each coil separately and feed both coils with a combined double potential. We draw connection diagrams.
Now let’s draw a diagram of the fields of the Rod of Hermes.
Let’s compare our scheme with the scheme from “Kalagiya”.
Everything matches.
Now the question “Why wings”? This is for control and stop. The wings are most likely made of glass. A plus is generated from friction on the glass. The wings are connected to the head. The head is in contact with the channels of the central body. The center channel is powered by a minus. Three wings or one wing – plus is fed into the Central Channel. The center channel stops or slows down. The “Beyond the circle” zone connected with the central channel also slows down or stops.
The launched Rod pumps gravitons into focus, into the Center point. This is where the compaction takes place. But the most remarkable thing is that the Rod begins to pull an excess amount of gravitons from Space into the Central Channel, which are concentrated in the focus of the Rod. An excess of gravitons forms a local zone of excess pressure in this place, which manifests itself in the form of repulsion, pushing objects placed there out of this zone. We observe the phenomenon of gravitational repulsion.
And this is only one kind of techno-magical device called the Rod of Hermes.
Electricity and heat from the ether
Our ancestors did not know electrodynamics, and therefore the mechanical drive of mechanisms was carried out through heating water and producing steam with the operation of steam engines. But even in that short period of time when both concepts, both etherodynamic and electrodynamic, existed in parallel for some time, even then the power generators were driven to generate electricity through heating water and producing steam. Just as it is now done in thermal power plants. Of course, there was also hydrogenation, but nevertheless, obtaining electricity was always associated with turning the electric generator.
This is because it was not an easy task to take and convert an etheric dynamic beam at once, directly into an electric current. More precisely, I would say that this is a simple task, but our ancestors simply did not have time to do it. There were big changes, and the etheric energy was destroyed.
Of course, anti-gravity, replication, materialization, teleportation, etc. are all very cool. But how, after all, would you like to fly to the taiga (well, or to the dacha), build a house, or just at least put up a tent, stick an ether generator into the ground, connect a converter to it and get 220 (380) volts 50 Hz in the network in the amount of power that you need, without any problems? restrictions.
The solution to this problem is very eloquently shown here in this very famous video. If you haven’t seen it, take a good look, and if you have, refresh all the details in your memory.
https/www.youtube.com/watch?v=i19Sm9gUJ9s
And here is the diagram itself
What do we see? First of all, high-voltage power lines. This transmission line saturates the space with high potentials, or in other words saturates the space with electrostatics. Gravitons and phonons. Where do these essential components go? Naturally to the Ground. And if there is a conductor, then an electric charge is induced on it, which flows into the Ground. If we make a small gap in the conductor, then a discharge will occur in this gap and the arc will burn. This is because gravitons are accumulating at one end of the gap, and there is a void at the other-everyone has escaped into the ground. A critical pressure difference occurs, with an explosive transition of gravitons through the gap, and with the release of light trapped in gravitons.
And what is interesting is that at this point of rupture, at the place of arc formation, an electric current occurs. But it’s not DC. This current is pulsing. To be absolutely precise, this is a pulsing unidirectional current of high frequency. This is actually an alternating current, but with no reverse current branch. A remarkable property of this current is that this current is also variable. This means that this type of current has the ability to transform.
That is, what happens. Before the spark gap (before the candle), we have an ether flow in the circuit, but in the spark gap and in the circuit after the spark gap, an electric current flows into the Ground.
This current can and should be converted. This is done using a transformer. The fact is that the electric current after the discharger has a very high voltage and a very small current. We need to use a step-down transformer to lower the voltage to normal household values and raise the current. Next, we rectify the current using a diode, since the field is specifically variable under the power line. You can also add a capacitor and smooth it out with a capacitor. And then we feed it to the phone for charging.
At the same time, the power after transformation-it will remain unchanged. And it is enough just to charge the phone. Well, or one LED flashlight.
Not enough… however… We need at least domestic and industrial volumes.
That is why instead of a power line, we will use an ethereal generator like the Wand of Hermes.
I do not yet know what type of generator should be used – centripetal, centrifugal, or Vajra in general. That is why this section is not a discussion of the issue, but a reflection. The truth will be obtained through experiments.
The generator directs the beam to the spark gap.
The mating part of the spark gap is connected to the Ground, but through a transformer. After the transformer, there is a rectifier, a controller and then a conventional industrial inverter, since, due to the development of alternative energy, they have made a whole line of products with a set of various capacities and parameters.
Next, we configure all this “music” to the desired parameters and use it. The gap in the spark gap and the very intensity of the feed in the head of the Rod are subject to settings.
Rod, unlike power lines, it collects gravitons in the form of a vortex funnel, and twisting them into a bundle directs them to the first half of the spark gap. The second half is connected to the transformer, and through it to the Ground. If the first half is negatively charged, then a positive charge is induced on the second half. Depending on the gap size in the spark gap, the breakdown voltage with a burning discharge arc is set. A positive charge cannot escape into the Ground – it is held by the negative charge of the first half. There is only one thing left – a breakdown and an arc.
But the problem is that a graviton discharge is a pure electric current voltage. Hundreds of kilovolts, and the current is near zero. Therefore, the power will also be near-zero. Useless. Well, maybe for lighting purposes. What to do?
We need to somehow add the second component-Fire, the basis of the current strength. And the carrier substance of Fire is phonons. That’s why I suggested that the carrier generator might be a Vajra. I don’t know yet how to organize a discharge in such a situation, but I think that this issue will be quite easy to solve. After all, our ancestors received heat to warm water without any problems.
Let’s use our theoretical framework and construct a different type of Baton. So far, only theoretically. Now I will explain why only theoretically.
We take the Baton. But the spiral snakes are twisted to the right. In the Rod discussed earlier, the spirals are coiled to the left, and the center channel is twisted slightly to the right. Here, the opposite is true.
Let’s go from the opposite. If the winding of the spirals is right, then this means that this Circle of Influence is connected to minus. That is, the graviton flow, passing through the turbulator (snake’s head), twists to the right at the output.
The central channel, respectively, is connected to the plus and twisted to the left.
The scheme turns out like this
This type of Wand also uses a centrifugal type of energy movement. But only the food signs are reversed. Then the scheme of fields of rotating energy tori will look like this
And what we see in the drawing of the newly constructed Rod. We see that phonons are concentrated at the point of focus. That is, heat is concentrated at the point of focus. This is where our ancestors got their heat to heat water for their steam engines. Fuel-free fireplaces also worked.
But this type of Wand may have another fundamental function – generating electricity from the etheric field directly directly with the parameters of industrial power. But this is what our ancestors did not know.
See the section “Etherodynamics and electrodynamics”. I’ll show you such a generator there. This generator is useless, as it only outputs voltage. The current is almost zero and the power is zero, respectively.
But if we apply our newly constructed Rod according to the same scheme, then the possibility of obtaining an electric current of industrial power becomes obvious
Here’s the thing. When the Wand is focused into focus, either phonons or gravitons are concentrated at this point. And these are particles filled with energy. Either it’s Fire or it’s Light. When you concentrate in focus, this energy is released.
We use light for the purposes of anti-gravity, teleportation, communication and many other things that we will come up with.
We use fire to generate heat, electricity, heat rays, and anything else we can think of.
I’m just going to jump ahead a bit and say that the centripetal type of generator allows you to get these channel, beam formations.
Well, something like that. The theory has started working…
